OPL AUv3 FM Synth3.2.3 - App Store

Bitte warten ... Die Verfügbarkeit der App-Liste wird überprüft.
Sie können Ergebnisse sehen in einige Sekunden.


Herausgeberbeschreibung

Die 1985 vorgestellten Yamaha-OPL-Chips prägten den Klang der Videospiel-Soundtracks der 80er und 90er Jahre. discoDSP OPL emuliert ihre FM- und additive Synthese einschließlich des charakteristischen Percussion-Modus und erweitert sie auf FM mit vier Operatoren, verteilt auf acht OPL3-Chips. Mit bis zu 16-fachem Oversampling für kristallklaren Klang und über 11.000 mitgelieferten Instrumenten eignet sich discoDSP OPL für klassische Spiele-Soundtracks, elektronische Musik oder eigene Klangexperimente.

Spielen Sie den Synthesizer auf dem iPad über die integrierte Bildschirmtastatur, mit einem MIDI-Controller oder in Ihrer DAW. Auf dem iPhone schließen Sie ein MIDI-Keyboard an oder nutzen ihn als Plug-in.

KERNFUNKTIONEN

• Stimmenpool aus acht YMF262-Chips (OPL3) mit allen acht Wellenformen pro Operator.
• Bis zu vier Modulatoren und vier Träger pro Note, mit acht Algorithmen und Routing-Diagramm.
• Percussion-Modus mit Bassdrum, Snare, Tom, Becken und Hi-Hat.
• Über 11.000 Instrumente: SBI-Kategorien, 4-Op- und OPL3-Bänke, Game-GM-Sets und TX81Z-Voices.
• Lädt neben SBI auch WOPL-, WOPLX-, OPLI- und TX81Z/DX-Sysex-Bänke.
• Oversampling von 1x bis 16x, mit separater Einstellung für den Export.
• Tonhöhenabhängiges Stereo-Panning.
• Unison im Stil des AN1x mit 32-stufiger Verstimmung und Stereobreite.
• Master-Lautstärke mit Valve- und Tape-Sättigung.
• MPE-Unterstützung mit Druck und Slide, routbar auf Syntheseparameter.
• Sustain-Pedal und samplegenaues MIDI.
• Bildschirmtastatur mit Pitch- und Modulationsrad (iPad, eigenständige App).
• Analog modellierter Wave Shaper auf dem Träger.
• Import und Export von SBI- und SBIX-Instrumenten über die Dateien-App.
• Erkennung von Bluetooth-MIDI-Geräten.
• AUv3-Plug-in für GarageBand, AUM, Cubasis, BeatMaker und Drambo.

DER OPL-KLANG

Die Zwei-Operatoren-FM ist der Klang der Adlib- und Sound-Blaster-Ära. Jede Stimme kombiniert einen Modulator und einen Träger, jeweils mit eigener Wellenform, Hüllkurve und Dämpfung. Im FM-Modus entstehen die metallischen, glockenartigen Klangfarben, für die der Chip bekannt ist; im additiven Modus lassen sich beide Operatoren als eigenständige Töne übereinanderlegen.

Feedback auf dem Modulator führt den Klang von sauber bis rau, und alle acht OPL3-Wellenformen stehen auf jedem Operator zur Verfügung. Sie stammen vom Chip selbst und sind keine Annäherungen.

MULTI-OPERATOR-MODUS

Mit den Tasten + und - fügen Sie Operatoren hinzu, bis zu vier Modulatoren und vier Träger pro Note. Wählen Sie einen von acht Algorithmen oder verschalten Sie die Operatoren selbst im Routing-Diagramm im Yamaha-Stil. Jeder Patch wird auf die 2-Op- und 4-Op-Kanäle des Chips übertragen, und acht OPL3-Chips liefern auch für große Patches und Unison genug Stimmen.

PERCUSSION-MODUS

Die Rhythmus-Sektion wandelt die letzten Kanäle in fünf eigene Schlagzeugstimmen um: Bassdrum, Snare, Tom, Becken und Hi-Hat. So erzeugte der Chip Schlagzeug ohne Samples.

INSTRUMENTE

Die SBI-Klänge sind nach Kategorien sortiert, die Ordner 4-OP und OPL3 enthalten Vier-Operator-Bänke aus Spielen, Game GM sammelt General-MIDI-Sets klassischer PC-Spiele, und TX81Z bietet Vier-Operator-Voices von Yamaha. Laden Sie sie über das Menü, blättern Sie mit den Pfeiltasten, oder importieren Sie eigene SBI-, WOPL-, WOPLX-, OPLI- oder TX81Z-Sysex-Dateien aus der Dateien-App. Bearbeitete Instrumente lassen sich als SBI exportieren, Multi-Operator-Patches als SBIX.

OVERSAMPLING

Der Chip wird mit bis zur 16-fachen Host-Samplerate emuliert, wodurch die FM-Seitenbänder nicht als Aliasing in das Audioband zurückfalten. Wiedergabe und Offline-Export haben getrennte Einstellungen.

EIGENSTÄNDIG ODER ALS AUV3

Laden Sie OPL in einen beliebigen AUv3-Host, wobei die Einstellungen im Projekt gespeichert werden, oder nutzen Sie die eigenständige App mit MIDI-Controller, Bluetooth-MIDI oder Bildschirmtastatur.



Über OPL AUv3 FM Synth

OPL AUv3 FM Synth ist eine paid App für iOS, veröffentlicht in der App-Liste Audio File Players, die Teil von Audio & Multimedia ist.

Das Unternehmen, das OPL AUv3 FM Synth entwickelt, ist DiscoDSP LLC. Die neueste vom Entwickler veröffentlichte Version ist 3.2.3.

Um OPL AUv3 FM Synth auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-10-07 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann OPL AUv3 FM Synth als Malware erkennen, wenn der Download-Link defekt ist.

So installieren Sie OPL AUv3 FM Synth auf Ihrem iOS-Gerät:

  • Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
  • Sobald OPL AUv3 FM Synth im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
  • Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
  • Nachdem OPL AUv3 FM Synth heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
  • Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.

Programmdetails


Allgemein

Herausgeber
Veröffentlichungsdatum
2026-10-07
Sprachen
German

Kategorie

Kategorie
Unterkategorie

Systemanforderungen

Betriebssysteme
iOS

Download-Informationen

Dateigröße
46.3 MB
Gesamtdownloads
0

Preisgestaltung

Lizenzmodell
Paid
Preis

Versionsgeschichte


Hier finden Sie das Changelog von OPL AUv3 FM Synth, seit es am 2026-11-01 auf unserer Website veröffentlicht wurde.Die neueste Version ist 3.2.3 und wurde am 16 November, 2026 auf Apps112 aktualisiert.Sehen Sie unten die Änderungen in jeder Version:

Version 3.2.3

veröffentlicht am 2026-10-07

Behoben: Der Attenuation-Regler setzte immer 0 dB und zeigte den gespeicherten Wert nicht an.
Velocity Sensitivity ist im Standard-Patch jetzt ausgeschaltet, sodass Attenuation wie in 2.x den Pegel des Operators bestimmt.

Version 3.2.3

veröffentlicht am 2026-10-14

Version History Fixed the Attenuation slider always setting 0 dB and not showing the stored value.
Velocity Sensitivity is now off on the default patch, so Attenuation sets the operator level as in 2.x. 3.2.3 6d ago New Play Mode menu with Poly, Mono and Legato, saved with each session.
Mono restarts the envelope on every note. Legato changes pitch without restarting it while keys overlap.
Releasing a key returns to the newest key still held.
The active mode shows next to the saturator.
Stolen voices now restart their envelope instead of continuing the previous note.
Fixed Attenuation having no effect on the default patch. Velocity Sensitivity is now off by default, as in 2.x. 3.2.2 Oct 3 Multi-operator mode: up to four modulators and four carriers per note, compiled onto 2-op and 4-op OPL3 channels.
Eight algorithms plus Custom, edited on a Yamaha-style routing chart.
Voice pool of eight OPL3 chips, so larger patches and unison keep their polyphony.
Over 9,000 new instruments in the 4-OP, OPL3, Game GM and TX81Z folders.
WOPL, WOPLX, OPLI and TX81Z/DX sysex banks load directly from the Files app.
New .sbix format for multi-operator instruments.
Velocity Curve parameter with a Relative setting for bank sounds.
Master Volume with an output level meter.
Saturator with Valve and Tape voicings that shape only the peaks.
Sustain pedal and sample-accurate MIDI timing.
Dragged values now show on the column label, so your finger does not cover them.
Lower CPU use: silent chips and channels are skipped.
Fixed stuck notes when the transport restarts, Percussion Mode changes or MPE is switched. 3.2 Sep 25 Added iOS 27 compatibility. 3.1.1 Sep 17 A new unison mode stacks five detuned layers per note, following the Yamaha AN1x voicing with a 32-step detune depth. Levels are compensated at every depth, and sounding notes retune live as you slide the control.

With unison on, the panning control becomes an AN1x-style stereo spread. The chip now renders in true stereo, layers route centre, left, and right, and the width blends from an exact mono mix to the chip's full separation.

The standalone app now keeps its state across restarts, so a force-closed app reopens where you left it. 3.1 Sep 1 Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 3.2.2

veröffentlicht am 2026-10-06

Version History New Play Mode menu with Poly, Mono and Legato, saved with each session.
Mono restarts the envelope on every note. Legato changes pitch without restarting it while keys overlap.
Releasing a key returns to the newest key still held.
The active mode shows next to the saturator.
Stolen voices now restart their envelope instead of continuing the previous note.
Fixed Attenuation having no effect on the default patch. Velocity Sensitivity is now off by default, as in 2.x. 3.2.2 2d ago Multi-operator mode: up to four modulators and four carriers per note, compiled onto 2-op and 4-op OPL3 channels.
Eight algorithms plus Custom, edited on a Yamaha-style routing chart.
Voice pool of eight OPL3 chips, so larger patches and unison keep their polyphony.
Over 9,000 new instruments in the 4-OP, OPL3, Game GM and TX81Z folders.
WOPL, WOPLX, OPLI and TX81Z/DX sysex banks load directly from the Files app.
New .sbix format for multi-operator instruments.
Velocity Curve parameter with a Relative setting for bank sounds.
Master Volume with an output level meter.
Saturator with Valve and Tape voicings that shape only the peaks.
Sustain pedal and sample-accurate MIDI timing.
Dragged values now show on the column label, so your finger does not cover them.
Lower CPU use: silent chips and channels are skipped.
Fixed stuck notes when the transport restarts, Percussion Mode changes or MPE is switched. 3.2 Sep 25 Added iOS 27 compatibility. 3.1.1 Sep 17 A new unison mode stacks five detuned layers per note, following the Yamaha AN1x voicing with a 32-step detune depth. Levels are compensated at every depth, and sounding notes retune live as you slide the control.

With unison on, the panning control becomes an AN1x-style stereo spread. The chip now renders in true stereo, layers route centre, left, and right, and the width blends from an exact mono mix to the chip's full separation.

The standalone app now keeps its state across restarts, so a force-closed app reopens where you left it. 3.1 Sep 1 Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 3.2

veröffentlicht am 2026-10-03

Version History Multi-operator mode: up to four modulators and four carriers per note, compiled onto 2-op and 4-op OPL3 channels.
Eight algorithms plus Custom, edited on a Yamaha-style routing chart.
Voice pool of eight OPL3 chips, so larger patches and unison keep their polyphony.
Over 9,000 new instruments in the 4-OP, OPL3, Game GM and TX81Z folders.
WOPL, WOPLX, OPLI and TX81Z/DX sysex banks load directly from the Files app.
New .sbix format for multi-operator instruments.
Velocity Curve parameter with a Relative setting for bank sounds.
Master Volume with an output level meter.
Saturator with Valve and Tape voicings that shape only the peaks.
Sustain pedal and sample-accurate MIDI timing.
Dragged values now show on the column label, so your finger does not cover them.
Lower CPU use: silent chips and channels are skipped.
Fixed stuck notes when the transport restarts, Percussion Mode changes or MPE is switched. 3.2 Sep 25 Added iOS 27 compatibility. 3.1.1 Sep 17 A new unison mode stacks five detuned layers per note, following the Yamaha AN1x voicing with a 32-step detune depth. Levels are compensated at every depth, and sounding notes retune live as you slide the control.

With unison on, the panning control becomes an AN1x-style stereo spread. The chip now renders in true stereo, layers route centre, left, and right, and the width blends from an exact mono mix to the chip's full separation.

The standalone app now keeps its state across restarts, so a force-closed app reopens where you left it. 3.1 Sep 1 Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 3.2

veröffentlicht am 2026-09-26

Version History Multi-operator mode: up to four modulators and four carriers per note, compiled onto 2-op and 4-op OPL3 channels.
Eight algorithms plus Custom, edited on a Yamaha-style routing chart.
Voice pool of eight OPL3 chips, so larger patches and unison keep their polyphony.
Over 9,000 new instruments in the 4-OP, OPL3, Game GM and TX81Z folders.
WOPL, WOPLX, OPLI and TX81Z/DX sysex banks load directly from the Files app.
New .sbix format for multi-operator instruments.
Velocity Curve parameter with a Relative setting for bank sounds.
Master Volume with an output level meter.
Saturator with Valve and Tape voicings that shape only the peaks.
Sustain pedal and sample-accurate MIDI timing.
Dragged values now show on the column label, so your finger does not cover them.
Lower CPU use: silent chips and channels are skipped.
Fixed stuck notes when the transport restarts, Percussion Mode changes or MPE is switched. 3.2 6h ago Added iOS 27 compatibility. 3.1.1 Sep 17 A new unison mode stacks five detuned layers per note, following the Yamaha AN1x voicing with a 32-step detune depth. Levels are compensated at every depth, and sounding notes retune live as you slide the control.

With unison on, the panning control becomes an AN1x-style stereo spread. The chip now renders in true stereo, layers route centre, left, and right, and the width blends from an exact mono mix to the chip's full separation.

The standalone app now keeps its state across restarts, so a force-closed app reopens where you left it. 3.1 Sep 1 Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 3.1.1

veröffentlicht am 2026-09-19

Version History Added iOS 27 compatibility. 3.1.1 1d ago A new unison mode stacks five detuned layers per note, following the Yamaha AN1x voicing with a 32-step detune depth. Levels are compensated at every depth, and sounding notes retune live as you slide the control.

With unison on, the panning control becomes an AN1x-style stereo spread. The chip now renders in true stereo, layers route centre, left, and right, and the width blends from an exact mono mix to the chip's full separation.

The standalone app now keeps its state across restarts, so a force-closed app reopens where you left it. 3.1 Sep 1 Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 3.1

veröffentlicht am 2026-09-12

Version History A new unison mode stacks five detuned layers per note, following the Yamaha AN1x voicing with a 32-step detune depth. Levels are compensated at every depth, and sounding notes retune live as you slide the control.

With unison on, the panning control becomes an AN1x-style stereo spread. The chip now renders in true stereo, layers route centre, left, and right, and the width blends from an exact mono mix to the chip's full separation.

The standalone app now keeps its state across restarts, so a force-closed app reopens where you left it. 3.1 Sep 1 Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 3.1

veröffentlicht am 2026-09-05

Version History A new unison mode stacks five detuned layers per note, following the Yamaha AN1x voicing with a 32-step detune depth. Levels are compensated at every depth, and sounding notes retune live as you slide the control.

With unison on, the panning control becomes an AN1x-style stereo spread. The chip now renders in true stereo, layers route centre, left, and right, and the width blends from an exact mono mix to the chip's full separation.

The standalone app now keeps its state across restarts, so a force-closed app reopens where you left it. 3.1 3d ago Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 3.0.1

veröffentlicht am 2026-08-24

Version History Fixed instruments missing on new installs. The factory sound banks are now copied into the shared folder on first run, so the app and the AUv3 plugin both see them. 3.0.1 Aug 8 PL has been rewritten from the ground up.

NEW FM ENGINE
The synthesis core is now built on the YMF262 (OPL3), replacing the previous OPL2 emulation. All eight OPL3 waveforms are available on every operator, where before there were four. The synthesis core, register layer, parameter handling, and interface have all been rewritten.

SOUND QUALITY
Oversampling up to 16x is now applied to the chip itself, cutting the aliasing FM produces at high modulation settings. Pitch, envelope timing, and key scaling stay constant across every oversampling setting. Playback and bounce have separate settings, and offline renders use a linear-phase filter and report their latency, so a bounce matches what you monitored.

NEW INTERFACE
Redrawn as resolution-independent vector graphics in place of the fixed-size bitmaps, and freely resizable with a zoom menu. Voice activity is now shown live on the envelope displays.

NEW PARAMETER
Panning: a key-tracking stereo spread that places notes across the field by pitch.

ON-SCREEN KEYBOARD
The iPad standalone app now has a MIDI keyboard, so OPL no longer needs an external controller to play. It sits below the panel with pitch and modulation wheels and octave buttons at each end. The modulation wheel drives a vibrato LFO with continuous depth, going well beyond the chip's own fixed two-position vibrato. Toggle it from Menu > Show MIDI Keyboard.

ON iOS
Oversampling settings are now available, with playback and bounce quality each set from 1x to 16x and remembered between sessions. Loading and exporting SBI instruments through the Files app and iCloud Drive has been fixed, and the AUv3 no longer opens at the wrong size in hosts.

COMPATIBILITY
Existing projects and presets load unchanged, with automation assignments preserved. Adds a new Init Bass factory program.

FM synthesis now uses ymfm by Aaron Giles under the BSD 3-Clause License. 3.0 Aug 6 Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Version 2.7.2

veröffentlicht am 2026-08-04

Version History Added App Data Group shared container between Standalone and AUv3 builds.
Added Bluetooth MIDI device discovery dialog to settings menu.
Added iTunes File Sharing support for SBI instruments.
Added Carrier analog modeled wave shaper parameter.
Fixed Carrier Multiplier label alignment. 2.7.2 Mar 6 Oversampling switched to 8x for better CPU performance and similar sound quality.
New menu button adds Export button with Load/Export options.
Modern popup menus with improved styling.
Per-project window size memory.
Reduced CPU usage during parameter automation and GUI processing.
Smart processing only affects active channels.
Optimized voice management eliminates audio dropouts.
Enhanced oversampling initialization and memory management.
Improved plugin state management and build system updates.
Major framework update. 2.7 08/13/2025 16x oversampling for pristine, alias-free sound.
Optimized voice management for enhanced efficiency and performance.
Updated interface with modern elements for a smoother user experience.
Significant core framework improvements for greater stability and performance.
Fixed crash issue when triggering more than 9 voices simultaneously. 2.4 08/14/2024 iOS 16 compatibility.
Framework update.
Touch friendly popup menus. 2.2 12/02/2022 iOS 15 compatibility.
Framework update.
Inter-App Audio compatibility. 2.1 09/24/2021 Fixed Modulator waveform 5 unable to be selected.
Fixed 12x or 15x Frequency multiplier on both modulator and carrier unable to be selected.
Fixed Keyscale attenuation order. Now -0, -3, -1.5, -6. 2.0 12/17/2020 AUv3 parameter exposure for host automation.
iOS Universal build with iPhone support.
Enhanced AUv3 GUI window display fit.
AUv3 GUI scrolling using left and right border sides. 1.8 09/15/2020 Preset name now displays in Load button.
Active folder and preset is displayed with a tick on the Load drop down menu.
Relocated - + preset navigation buttons. 1.7 06/23/2020 Fixed FM and Additive icon graphic locations. 1.6 06/07/2020 Fixed AUv3 issue with combo box values not being displayed. 1.5 06/07/2020 1.4 06/04/2020

Haftungsausschluss


Offizieller App Store-Link


Wir hosten OPL AUv3 FM Synth nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.

Der App-Store-Link für OPL AUv3 FM Synth wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.

Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.





Klicken Sie auf Sterne, um diese APP zu bewerten!

Nutzerbewertung:
  0.0/5     0
Downloads: 0
Aktualisiert am: 2026-11-16
Herausgeber: DiscoDSP LLC
Betriebssystem: iOS
Lizenztyp: Paid

TOP-DOWNLOADS
letzte Woche in Audio & Multimedia